• were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • were developed for use as reference or calibration materials and in applications where a high visual contrast is desired. The product line consists of uniform particle sizes between 50 and 500 microns in either red or black color. The microspheres are made from cross-linked polystyrene divinylbenzene (PSDVB) copolymer and can be stored at room temperature. They can be dispersed in aqueous media with the aid of a small amount of surfactant, or in lower alcohols, such as methanol and ethanol. Some dye extraction will result when the particles are suspended in pure alcohols, but will be minimal. Other organic solvents, such as ethers or chlorinated hydrocarbons, should be avoided because they will swell the particles and completely extract the dye. Chromosphere T product include a Certificate of Calbration and Traceability. Typical applications include: • Reference or calibration materials • Testing of filtration media and systems • Vial and container cleaning evaluations • Flow tracing and fluid mechanics • Contamination control • Sedimentation processes • Calibration of injection devices • Pharmaceutical manufacturing control
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • This product line is intended for researchers who are developing lateral flow diagnostic tests, and for other scientific investigations in diagnostics and biotechnology where labeling and detection of very low concentrations of substances is required. Microspheres are available with black, blue and red visual colors and four different bright fluorescent colors. Carboxylate modified surface functionalities are available. The diameter coefficient of variation (C.V.) of the microspheres is less than 5%, ensuring uniform migration through membranes. The microspheres are 0.4 or 0,85 micrometers nominal diameter, where the first is an optimal size for most latex-based lateral flow tests. They are prepared without detergents so they can be used immediately without pre-cleaning. Color-Rich particles are loaded with up to 25 % dye by weight, much more than other comparable products. This results in high intensity particles that give superior test sensitivity in qualitative lateral flow applications. The introduction of quantitative lateral flow tests has created a need for colored and fluorescent microspheres that are designed specifically for this new technology. In addition to our high intensity colored products, we offer the same microspheres dyed with bright fluorescent dyes.
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
  • Copolymer particle suspensions
Go to Top